Biomass Consulting & Solution Development Intl.


Biomass Consulting & Solution Development International

The Biomass and Bioenergy Consulting Service is based at the and is a specialized agency providing expertise on renewable energy raw materials.

The purpose of this service is to provide information on the use of biomass as a renewable energy.
It aims to facilitate information transfer between producers and users of biomass energy in order to increase the use of biomass energy in your country.

Start your Biomass Business, Get your own Biomass Boss instead Oil Boss

Biomass Business School
Reasons why to order our Bio Consulting Services-

You don’t waste any time for checking factory by factory in Germany, you can order us by doing that job for you, we write recommendations for you.

You don’t need to seek your own the complete European market, that work we do day by day , new by new.

->> We offer that service at and for the complete European market for:

--> Biogasplants 30 kW to 5000 kW
--> Wood Gasification Boilers 15 kW to 2.000 kW
--> Straw Gasification Boilers 100 kW to 20.000 kW
--> Wood chip Boilers 30 kW to 10.000 kW
--> Pellet Boilers 30 kW to 5.000 kW
--> All Kind Combined Heat AND Power Generators 5 kW to 5.000 kW CHP, ORC
--> All Microturbines
--> All Gas Absorption Heating Pumps, GAHP, MHP
--> All Direct Fired Gas Absorption Chillers
--> Sun Energy Products
--> All known Heat Recovery Systems in the Industry

Learn how to..

--> Calculate the size of a boiler for facilities, that brings cash back in the shortest time
--> Apply those systems correctly in hydraulics and electrics to the grid
--> Take care how to calculate the cash back of the system

You can learn at the clients locations:

--> What to care for the maintenance & service
--> Service Costs
--> Lifetime
--> How they work
--> How they to install
--> How they to repair

This Service is applied to all Factories all Companies in Europe


Environmental concerns

Worldwide, electricity is today produced almost exclusively through large-scale plants whereas the thermal supply is effected almost exclusively through decentralized boiler-based heat production.

So heating energy is produced on a decentralized scale rendering excellent efficiency rates – that is allowing a high exploitation of the combustible – whereas central large-scale plants continue to deliver efficiencies at about just 36%.

The heat resulting from the production of electricity, which is approx. 65% of the primary energy utilized, is released in the form of heat and is discharged into the environment through cooling towers.

It is this very point the idea of combined heat and power was born. In the event of combined heat and power production, electricity and heat is produced on a decentralized scale, directly at the consumer’s site where it is fed into the object to be supplied. This allows to utilize the primary energy used (natural gas, fuel oil) at an efficiency of 90%.


Combined Heat and Power Plant Units Engineering

Producing electricity and heat on site in a tailored combined heat and power plant

Saving energy, cutting costs at the same time reducing the environmental impact – a combined heat and power plant is capable of coping with all of these aims.

No matter whether you consume a combination of electricity and heat or a combination of electricity and cold: a combined heat and power plant will help to cut your energy costs significantly.

Combined heat and power provides an energy efficiency of up to 90%.

At the same time, the CO2 output is reduced by more than one third. Individual adaptation to the objects to be supplied and a high degree of availability renders our plants calculable even in the long term.


You are here:  >> Home