Company
German Biomass & Renewable Engineering with possible Installation and Service
Engineering Sales & Shipping Since 1992
OUR THEMES
-> Combined Heat and Power Plant Units Engineering With Biomass and Fossil Fuels.
-> Producing electricity and heat on site in a tailored combined heat and power plant.
-> Reasons:
>> Saving energy, cutting costs at the same time reducing the environmental impact – a combined heat and power plant is capable of coping with all of these aims.
>> No matter whether you consume a combination of electricity and heat or a combination of electricity and cold: a combined heat and power plant will help to cut your energy costs significantly.
>> Combined heat and power provides an energy efficiency of up to 90%.
>>A t the same time, the CO2 output is reduced by more than one third. Individual adaptation to the objects to be supplied and a high degree of availability renders our plants calculable even in the long term.
Environmental concerns Worldwide, electricity is today produced almost exclusively through large-scale plants whereas the thermal supply is effected almost exclusively through decentralized boiler-based heat production.
So heating energy is produced on a decentralized scale rendering excellent efficiency rates – that is allowing a high exploitation of the combustible – whereas central large-scale plants continue to deliver efficiencies at about just 36%.
The heat resulting from the production of electricity, which is approx. 65% of the primary energy utilized, is released in the form of heat and is discharged into the environment through cooling towers.
It is this very point the idea of combined heat and power was born. In the event of combined heat and power production, electricity and heat is produced on a decentralized scale, directly at the consumer’s site where it is fed into the object to be supplied.
This allows to utilize the primary energy used (natural gas, fuel oil) at an efficiency of 90%.NRG-Consultants.com Services Engineering & more for Biomass Power Plants
German Biomass & Renewable Engineering with possible Installation and Service
Engineering Sales & Shipping Since 1992
Our office locations:
Europe: Hamburg Bielefeld Berlin München
Middle East UAE Dubai
Head Quarter Office
BHKW-Anlagen Ltd.
Mr. Holger Roswandowicz (Engineer)
Werfener Heide 14
Germany 32257 Buende
mail info//@//nrg-consultants.com
web www.nrg-consultants.com
phone ++ 49 5223 1800 939
fax ++ 49 5223 1800 047
About NRG-Consultants.com
Head Engineering
Mr. Holger Roswandowicz
C.E.O.
Engineer Power Generation 15 Years Experience
Application Development, Scaling Coogeneration, Absorption Chiller,
Heatpumps, Stirling Engines
Worldwide Sales Experience
Own Engineering and Equipment Company, Manufacturer Heat Recovery Systems Locations Hamburg , Hannover, Magdeburg, Dubai
Mr. Christoph Ellerhoff
Chief and Application Engineer Heating Cooling Power Generation
Scaling and applicationing Biomass Heating, Heating Power, Grid
25 Years of Experience
C.E.O. of his Heat and Power Service and Contracting Company, Manufacturer
of Heating Systems
Locations Hannover, Munich
Mr. Manfred Brunke, Engineer Heat and Power Generation
Senior Consultant
35 Years Experience
C.E.O. of his Steam and Heat Generation Process engineering Company
Worldwide Applicationing, *Manufacturer Steam Aplications ,Condersers, Steam
Generators*
Location Hannover, Bielefeld
Mr. Dr. Haschke
Engineering of Distinct Heating, Power Plants up to 20 MW
Scaling & Development
20 Years of Experience
C.E.O. of his own Engineering Company
Location Berlin
Cost Saving Manufacturing:
On Demand at Several European Locations
Form for your Message or quotatation request